SOLAR RADIATION ENVIRONMENT CHAMBER
Category Archives: NEW VERSIONS OF STANDARD PRODUCTS
VIBRATION SHAKER INTERFACE ENVIRONMENTAL TEST CHAMBER
Desktop-Mini-Environmental Chamber
EM-Series MINI Environmental Chambers from Envisys Technologies designed for table/desk-mounting use with small foot-prints. Modular design suitable for small component level testing applications and space-constraint laboratories.
THERMAL SHOCK CHAMBER – SMALL
The smallest model of Thermal Shock Chamber with test basket volume of 50 Litres (1.76 cu.ft) for miniature device testing with smallest possible footprints of the test chamber ideal for space constraint laboratories
Mini Environmental Test Chamber
A floor model Mini-Environmental Chamber of 30 litres or 1 cubic feet workable space from Envisys designed for space constraint laboratories in mind with lowest possible footprints and movable on heavy duty castor wheels with easily accessible top mounted control panel
Water Ingress Protection (IP) Test Equipment – IPX1-IPX9K
Water Ingress Protection (IP) Test Equipment for simulating different levels of water spray proof tests as per IP standards viz., drip water drops tests (IPX1-IPX2), spray water & splash water tests IPX3-IPX4), low/high pressure jet water tests (IPX5-IPX6) + IPX6K, water immersion tests (IPX7-IPX8), high temperature high pressure water tests (IPX9K) etc.,
THERMAL SHOCK CHAMBER-HORIZONTAL BASKET MOVEMENT
Thermal Shock Chamber with horizontal basket movement is designed and manufactured by Envisys Technologies using pneumatic guided basket movement carrying the specimen from cold to hot zone and vice versa with the help of wheels and guides for easy movement of the basket to transfer the specimen from one zone to another within few seconds as per international standards for thermal shock testing of electronics, automotive, defence, aerospace etc., components or products.
IPX7-IPX8 IMMERSION TESTING
Immersion Test Tank is designed and manufactured by Envisys Technologies to simulate ingress protection tests as per IPX7 & IPX8 specified in the IEC 60529 standard to test the effects on the device with continuous immersion in the water.
Immersion test on electronic, automotive etc., components and products in these industries has become an important parameter of testing and qualification in the recent years to declare IP rating of respective products for water resistance.
Salt Fog Chamber – Walk-in Type
Walk-in Salt spray chambers are specially designed for corrosion resistance testing of large sized materials and coatings by subjecting the test specimens to a highly corrosive environments, which accelerates the corrosion process.
A walk-in corrosion test chamber is a large chamber that can accommodate test specimens and assemblies of varying sizes eg., entire car or entire machine. The chamber is specially designed to generate a highly corrosive environments of salt spray, which accelerates the corrosion process. The test specimens are placed inside the chamber and the fog environment is adjusted to the specific test requirements. The performance of the specimens is thereby evaluated for the signs of corrosion.
UV Chamber
UV light simulation is an important tool for testing the durability and UV resistance of various products. By using a UV light simulator and following the appropriate test procedure, it is possible to identify any potential issues with products before they are deployed in outdoor environments. Envisys designs and manufactures such UV simulation chambers suitable to the application of products which requires UV light simulation to test the durability and UV resistance of products.
