ENVISYS – TESTING LABORATORY – PEENYA – BANGALORE
Testing Zone I
Testing Zone II
Envisys Test Lab - An Initiative of Envisys is an exciting new vertical of Envisys Technologies Pvt Ltd. This new venture marks a significant milestone in our ongoing commitment to innovation and excellence in environmental testing solutions.
Our new Environmental Test Lab Envisys Test Lab - An Initiative of Envisys is equipped with varied test chambers/equipment and lead by a team of experienced professionals dedicated to providing comprehensive testing services. This facility will enable us to offer an expanded range of testing capabilities, ensuring that we meet the evolving needs of our clients with the highest standards of quality and reliability.
The current and future scope of testing services of Envisys Test Lab includes Product Qualification/Reliability/Performance Testing, Material Analysis Testing, ESS (HALT/HASS) Testing, Proto-Type Development for Armed Forces as per National/ International Standards with an objective to meet needs of industries in fulfilling Make-in-India and Vikasit Bharat initiatives of our country.
Testing Zone I
Testing Zone II
Varieties of
Envisys Test Lab offers wide variety of environmental testing services to spectrum of industries including automotive, electronics, defence, aerospace, consumer goods, packaging, textile, plastic etc., in compliance to customer specific and international standards.
Envisys test lab is currently offering the following testing services to cater to the needs of various industries for testing their products for product performance and reliability:
| Scope of Testing | Standards Covered / Compliance of Standards |
|---|---|
| Temperature and Relative Humidity | MIL-810, DO 160. JSS 55555, IEC-60068-2-1, IEC-60068-2-2. IEC-60068-2-14, IEC-60068-2-30,IEC-60068-2- 78, IS 9000 Part II Sec. 1 to 4, 1977 & Sec. 1 to 5, 1977, Basic climatic test procedures, Part 2: Cold test, Part 3: Dry heat test: IS 9000 Part IV, 2008 & Part V Sec. 1 & 2, 1981 Basic climatic test. Part 4: Damp heat, steady state. Part 5: Damp heat, cyclic test.: IS 9000 Part VI, 1978. Basic climate test. Part 6: Composite temperature/humidity cyclic test: ISO 9022, Part 2-Cold, heat and Humidity etc., |
| Corrosion (Salt Spray) Testing | ASTM B-117, GM 4465P, MIL 810, MIL 202, ISO 9227 etc., |
| Dust Simulation Testing – IP Tests | DIN/IEC 60529, DIN 40050 part 9 etc., |
| Rain Simulation Testing – IP Tests | DIN/IEC 60529, DIN 40050 part 9, |
| Thermal Shock Testing | IEC 60749-25, IEC 60068-2-14, IEC-61747-5, MIL-STD-202 etc., |
| Vibration Testing & Shock Testing (<50 kgs specimen weight) | JSS 55555, MIL-STD 810, DO 160 etc., |
| Environmental Test Chamber | Walk-in Environmental Chamber |
|---|---|
| Volume: 1500 litres | Volume: 6000 litres |
| Internal dimension: 1000x1000x1500 mm | Internal dimension: 1600x1500x2500 mm |
| Temperature: -70°c to 180 °c | Temperature: -65°c to 180°c |
| Ramp rate : 3°C/min as per IEC | Ramp rate : 5°C / min as per IEC |
| Pay load : 100kg UDL | Pay load : 200kg UDL |
| Humidity: 20% to 95% RH |
| Thermal Shock Chamber | Salt Spray Corrosion Test Chamber |
|---|---|
| Basket dimensions: 800X750X500 mm | Internal dimension: 1350X800X850 mm |
| Basket load: 10-15kg | Pay load : 200 kg UDL |
| Temperature: -75°c to 200°c | Chamber temperature: ambient to 50°c |
| Hot work zone temperature: 70°c to 190 °c | Saturator temperature: ambient to 65°c |
| Cold work zone temperature: 0°c to -65°c | Dry temprature: ambient to 70c controlled Humidity |
| No of zone: 2 zones with pneumatic transfer | Test standards compliance: ASTM 8117, ISO 9227,JSS 55555,MIL 810-D |
| Controlled Humidity: 45%-96% RH | |
| Volume: 900 liters |
| Dust Test Chamber (IP Test Chamber for Dust) | Rain Test Chamber (IP Test Chamber for Water) |
|---|---|
| Volume: 1000 litres | Volume: 1400 litres |
| Internal dimension: 1000x1000x1000 mm | Internal dimension: 1190x1170x1250 mm |
| Pay load : 40 kgs | Pay load : 30 kgs on rotating table |
| Test standards compliance: IEC 60529, ISO 20653 | Test standards compliance: IEC 60529, ISO 20653 |
| Test type: IP5X,IP6X | Test type: IPX1,IPX2,IPX3,IPX4,IPX5,IPX6, JSS55555 |
| Electro Dynamic Shaker & Shock Test | Vibration Shaker Interface Environmental Chamber |
|---|---|
| 4000 Kgf peak Sine and rms Random | Temperature Range: -70 deg C to 180 de C |
| 100 ‘g’, 50 mm displacement, 1.8 mtr/sec velocity | Internal Test Space Volume: 1000 Litres |
| 440 mm Armature diameter | Internal Test Space Dimensions: 1000 mm W x 1000 mm D x 1000 mm H |
| HST 1000 X 1000 MM. SHE 1000 X 1000 MM. | Temperature Ramp Rate: 5 deg C |
| Relative Humidity Range: 10% to 98% |
give us a shout
